Detailed product description
Our new concept Ceramic introduces a new product - POLYGEL CERAMIC in a tube. It follows the Ceramic gel varnish system, which is one of the most advanced professional gel-based poly gels in a tube thanks to its non-toxicity, mineral content and the absence of HEMA monomer. It stands out for its strong adhesion, high durability and very light and flexible feel on the nails.
Polygel is a hybrid gel that combines the hardness of acrylic and the flexibility of gel. It is a very innovative system in nail modelling. It is suitable for nail tips and templates and also for all types of natural nails. It is odourless, does not burn in the lamp and is very strong after curing. It is very easy to work with.
durability: 21+ days  
viscosity: thick gel consistency 
pigmentation: strong 
self-levelling: low
strength after drying: strong  
UV/LED lamp curing time: 60sec  
application procedure: brush/spray from the new ENII NAILS collection 
efflorescence: yes  
removal: with gel remover 
soak off/dissolve with remover: yes 
removal time: 15-20 min if the top coat is disturbed by sanding or filing 
colour: colour collection 
non-standard factors: weak nail, brittleness, dryness, discolouration, hormonal imbalance... 
functional system: CERAMIC HARD BASE / CERAMIC Gummy Base + CERAMIC Polygel + TOP
INCI: (meta) acrylic ester co-polymer, 2,2-bis(acryloyl oxymethyl) butyl acrylate (trimethylol propane triacrylate), polyethylene terephthalate, poly(methyl methacrylate), ethyl methacrylate, dimethyl polysiloxane, paraffin waxes and hydrocarbon waxes, microcryst, MICA
Application procedure:
Prepare the nails with a precise manicure - e.g. "Russian" manicure.
Apply Nail Prep to dehydrate, degrease and disinfect the nail.
We apply a "nail glue" e.g. Super Stick (contains HEMA) or Hard Base Ceramic, which must be cured to maintain the whole system without HEMA
Then apply the desired amount of Poly Gel directly to the nail or base with a metal "spatula" or pusher.
With a brush dipped in a liquid designed for poly gel, we model the poly gel into the desired shape, cure in a UV/LED lamp for at least 60 sec., depending on the thickness of the applied material.
Apply colour (gel polish, coloured gel, decorating...) or leave in natural look.
Finally, apply the top coat and cure in the lamp.
 
POLY GEL is suitable for home and professional use.
REMOVAL
Gentle removal using a remover
Peel or file off the top layer of material.
Then wrap each nail in remover foil soaked in remover (Hybrid Remover).
Make sure the swab in the foil has covered the entire surface of the nail and the contact is firm.
Press the foil carefully against the nail, paying special attention to the nail rollers.
Apply to all nails and leave on for at least 15-25 min. Removal time depends on many factors: use of adhesive or dehydrator, thickness of each layer, degree of disturbance of the top layer, damage and dryness of the nail, etc.
We start to feel a gentle warmth on the nails.
Remove the foil and use an orangewood to remove the material that has lifted away from the nail.
If removal is difficult, wrap the nail in foil again for another 5min. It is possible that the nail did not have enough heat or is thin and damaged and the adhesion of the material was therefore stronger.
After removing the material, you can still file the nail gently with a buffer and wipe with a pulp swab dipped in remover.
If not proceeding further, i.e. applying another gel polish system (before which the nail would need to be degreased with a cleaner), proceed by applying an oil or nourishing serum to the cuticles and nail surfaces with massage.
Removal using a nail grinder
Select the appropriate type of cutter and carefully sand away the material. We only use this method of removal if we have sufficient experience with an electric grinder. There is a risk of injury and breaking through the natural nail. The advantage - speed. Advantage - speed. Disadvantage - the risk of destroying nails.SAFETY INFORMATIONThis product is not suitable for children. Keep out of reach of children.Avoid contact with skin. Product should not be applied outside the nail, on the surrounding cuticle. If this happens, wash with soap and water before curing. If skin irritation should occur, see a physician. Although it does not contain HEMA, an allergic reaction to any other ingredient may occur.Avoid contact with eyes. If this happens, wash with a few minutes of water and if the eye is irritated, see a doctorDo not use this product if an allergic or other abnormal reaction occurs.Professionals, always use disinfectant and rubber gloves when applying.Recommended storage: keep tightly sealed, at room temperature, out of direct sunlight, also beware of direct contact with UV or LED lamps not only in the lamp, which can also slightly harden the material and then reduce its functionality.